Passive Optical Network Fiber Optic Splitter
Fiber Optic Splitter is one of the Passive Optical Network, are widely used in Networks implementing BPON, GPON, EPON, 10G EPON, and 10G GPON technologies currently. There are two kinds of fiber splitters: FBT Splitter/Coupler and PLC Splitter.

Optical splitters Specifications
Optical splitters contain no electronics and rehearse no power. An optical splitter is utilized to split a single optical fiber into separate strands, when it comes to routing optical signals to multiple near end or remote locations. The Optical Splitter supports over 7,000 IP voice, data and video network connections to one Ethernet device. Optical Splitters can be found in three different versions; being a cable, being a tabletop enclosure, so when a rack-mountable unit, that have superior design and are constructed from good quality components. The splitter can be deployed within the Central Office (CO) alongside the OLT, or it can be deployed in a OutSide Plant (OSP) cabinet better the subscribers. A splitter can be deployed within the basement of the building for a Multiple Dwelling Unit (MDU) installation.
Categories
Optical Splitters can be found in configurations from 1x2 to 1x64. There are 2 basic technologies for building passive optical network splitters: FBT Splitter/Coupler (Fused Biconical Taper) and PLC Splitter (Planar Lightwave Circuit). FBT Coupler could be the older technology and usually introduces more loss than the newer PLC splitters, though both PLC splitter and FBT splitters are widely-used in PON networks. FBT attenuation is often a bit greater than attenuation from plc splitter.
FBT Splitter makes two (a couple of) fibers removed the coating layer gather inside a certain way, stretched to either side within the heating zone at the same time, form a double cone? It is special waveguide structure finally for getting an alternative splitting ratio via controlling length of the fiber torsion angle and stretch. A FBT splitter is created by wrapping two fiber cores together, putting tension on the optical fibers, then heating the junction before the two fibers are tapered from the tension and fused together.
PLC Splitter can be a micro-optical element using photolithographic techniques to form optical waveguide at medium or semiconductor substrate for realizing branch distribution function. PLC Splitters are positioned in each optical network involving the PON Optical Line Terminal (OLT) and also the Optical Network Terminals (ONTs) how the OLT serves.
Optical splitters are widely used in Networks implementing BPON, GPON, EPON, 10G EPON, and 10G GPON technologies currently.
###
Tag Words:
plc splitter, optical splitter
Categories: Business
Press Release Contact
Intelligent Tower, Fumin Rd., Futian District, Shenzhen
Intelligent Tower, Fumin Rd., Futian District, Shenzhen